1, the mixer should be set in the flat position, with square wood cushion up and rear axle, so that the tire high overhead, in order to avoid moving around.
2, the mixer should carry out two-level leakage protection, before work power is connected, must carefully check, after the empty test to think qualified, before use. Commissioning test should be to check whether the mixing drum speed is appropriate, in general, empty car speed specific vehicle (after charging) slightly
Fast $number Turn, if the difference is more, should adjust the gear wheel and drive the ratio.
3, mixing cylinder rotation direction should be in line with the direction of the arrows, if not true, the electrical wiring should be corrected.